Assembling the valve box or installing the valve box is fairly straight forward. Usually there is a little bit of cutting involved in order to fit the box over your pipes. Sometimes you have to cut out a piece of a side, or sometimes you don’t have to cut out anything if the pipes are deep enough in the ground. But in our case our holes are perfect for our situation and we just cut out the slivers of plastic and they fit right in over our pipe. And then you will make your final placement after your valves are fully installed.
So, now we are ready to start out valve box. We’re going to show this in close to real time because it’s a fairly important part of the process and one of the more technical parts. So, here I am cutting 3 to 4 inch pieces of Schedule 40 High Pressure PVC Pipe so that I can use them as connectors to my T’s and elbows when putting together the three valves that we have for this system. Of course, you’ll want to clean each piece before assembling ...
